Transfer data with Bluetooth or infrared
Tip: If you transfer data from your previous device, the device may require you to insert the SIM card. Your Nokia E65
does not need a SIM card when transferring data.
To start transferring data from a compatible device, select
Menu
>
Tools
>
Transfer
>
Transfer data
.
Bluetooth connectivity
1. In the information view, select
Continue
.
2. Select
Via Bluetooth
. Both devices must support the selected connection type.
3. Activate Bluetooth in your other device, and select
Continue
in your Nokia E65 to start searching for devices with active
Bluetooth connectivity.
4. Select
Stop
in your Nokia E65 after it has found your other device.
5. Select your other device from the list. You are asked to enter a passcode (1 to 16 digits) on your Nokia E65. The passcode is
used only once to confirm this connection.
6. Enter the code on your Nokia E65, and select
OK
. Enter the passcode on your other device, and select
OK
. The devices are now
paired.
See "Pair devices," p. 60.
For some phone models, the
Transfer data
application is sent to your other device as a message. To install
Transfer data
on
your other device, open the message, and follow the instructions on the display.
7. From your Nokia E65, select the content you want to transfer from your other device, and
OK
.
Infrared connectivity
1. In the information view, select
Continue
.
2. Select
Via infrared
. Both devices must support the selected connection type.
3. Connect the two devices.
See "Infrared," p. 61.
4. From your Nokia E65, select the content you want to transfer from your other device, and
OK
.
Content is copied from the memory of the other device to the corresponding location in your device. Copying time depends on
the amount of data to be transferred. You can also cancel and continue later.
The necessary steps for data transfer may vary depending on your device, and whether you have interrupted data transfer
earlier. The items that you can transfer vary depending on the other device.