Cable connection
Install the USB data cable driver to your PC before you use a cable connection. You can use the
Data transfer
without installing
the USB data cable drivers.
Select
Menu
>
Connect.
>
Data cbl.
.
Using a USB data cable, you can connect your device to a compatible PC . Connect the USB data cable to the bottom of the device.
To change the device type you normally connect to your device with the data cable, press the scroll key.
Select from the following:
•
Ask on connection
— Select whether you want to be asked for the device type every time you connect the data cable to your
device.
•
PC Suite
— Connect the PC Suite to your device with the data cable, and use your device as a modem.
•
Data transfer
— Access and transfer data such as music or image files from your computer using the data cable connection.
To use the
Data transfer
mode, make sure that you have not selected USB as a connection type in the Manage connections
settings in Nokia PC Suite. Insert a memory card to your device, connect the device to a compatible computer with the USB
C o n n e c t i v i t y
© 2007 Nokia. All rights reserved.
58
data cable, and select
Data transfer
when the device asks which mode is used. In this mode, your device acts as a mass storage
device and you can see it as a removable hard drive in your computer. The device will switch into the
Offline
profile if this is
selected. End the connection from the PC (for example, from an Unplug or Eject Hardware wizard in Windows) to avoid
damaging the memory card. After you end the connection, the device returns to the profile in which it was before using the
data transfer mode.